Blog
Hydronic Heating vs. Forced Air Pros and Cons for Cold Climates
Winter in a cold climate can be brutal if your heating system isn’t up to the task. That’s why choosing between hydronic (radiant) heating and forced air matters. Both can keep a house warm, but they do it very differently—and the choice can affect comfort, bills, and even air quality.
READ MORE
The Importance of Air Elimination in Hydronic Heating
In the world of hydronic heating, few factors are as important — yet often overlooked — as air elimination. Whether you’re a homeowner looking for consistent comfort or a professional installer designing high-performing systems, understanding the role of proper air removal is essential to maximizing efficiency and extending the life of the equipment.
READ MORE
Heat Pump vs. Gas Furnace : How to Guide Homeowners Through the Decision
Choosing between a heat pump and a gas furnace can feel overwhelming. For homeowners, it’s about finding a solution that balances comfort, cost, and sustainability. For professionals, it’s about guiding clients through that decision with clear explanations, technical expertise, and product knowledge.
READ MORE
Comparing Sheet Metal Joint Sealing Options: Tape vs. Sealing Compounds
When you’re working with sheet metal, whether it’s ductwork, panels, or any other application, the question of how to seal the joints always comes up. It might not be the flashiest part of the job, but it matters. A poor seal can lead to leaks, corrosion, wasted energy, and even safety issues down the road.
READ MORE
Top 5 Tools Every HVAC Installer Should Have on Their Truck This Cooling Season
With peak summer demand around the corner, HVAC installers need to be prepared for anything. The right tools can save time, reduce jobsite stress, and prevent costly callbacks. Whether you’re troubleshooting, replacing components, or installing new systems, these essentials belong on every truck this cooling season.
READ MORE
Air Conditioner vs Heat Pump…Pros and Cons For The Average Homeowner
When it comes to keeping your home comfortable year-round, choosing the right HVAC system is key. For most homeowners, this choice often comes down to two main options: the traditional air conditioner or the increasingly popular heat pump. So which is better? Let’s break down the pros and cons of each to help the average homeowner make a smart, energy-efficient decision.
READ MORE
Seasonal HVAC Maintenance Kits: What to Stock Up on Before Peak Season
As HVAC demand surges with seasonal temperature shifts, preventative maintenance is key to avoiding breakdowns and costly repairs. Metalworks offers seasonal HVAC maintenance kits designed to keep systems running smoothly year-round.
READ MORE
Custom Sheet Metal Solutions: When Off-the-Shelf Won’t Cut It
In HVAC and hydronic systems, standard ductwork and fittings don’t always fit unique architectural designs or retrofit projects. That’s where custom sheet metal fabrication comes in. Metalworks specializes in precision-crafted sheet metal solutions that ensure optimal airflow, efficiency, and longevity.
READ MORE
Hydronic vs. Forced Air Heating: Pros, Cons, and Ideal Applications
Choosing the right heating system for a residential or commercial project can be challenging, especially when weighing hydronic (radiant) heating against forced air systems. Both have distinct advantages and drawbacks, and the best choice depends on your specific needs.
READ MORE
How to Choose the Right Boiler or Heat Pump for Your Project
Selecting the right boiler or heat pump is critical for efficiency, comfort, and cost-effectiveness. With so many options available, how do you make the best choice? Metalworks, a trusted HVAC and hydronics wholesaler, breaks down the key factors to consider.
READ MORE
Why Sourcing from a Specialized HVAC & Hydronics Wholesaler Saves You Time and Money
When it comes to HVAC and hydronic systems, every project demands high-quality components, expert advice, and reliable supply chains.
READ MORE
Troubleshooting Common Hydronic Heating Issues and How to Fix Them
Hydronic heating systems are reliable and efficient—but like any system, they can develop issues over time. Here’s how to spot and solve the most common problems.
READ MORE
The Role of HVAC Systems in Indoor Air Quality: What You Need to Know
Your HVAC system does more than heat and cool—it plays a critical role in indoor air quality (IAQ). Here’s how your system affects the air you breathe, and what you can do to improve it.
READ MORE
Top HVAC Maintenance Mistakes and How to Avoid Them
A little HVAC maintenance goes a long way—but only if you're doing it right. Here are the top mistakes Canadian homeowners make and how to steer clear of them.
READ MORE
Why Choosing the Right Ductwork Matters for HVAC Performance
When it comes to heating and cooling, your HVAC system is only as efficient as your ductwork. Here's why investing in the right ducts is essential for performance, comfort, and cost savings.
READ MORE
The Future of HVAC Technology: What to Expect in the Next 5 Years
As energy efficiency, smart homes, and climate-conscious building practices continue to evolve, the HVAC industry is undergoing a major transformation. Here’s what homeowners, contractors, and property managers can expect over the next five years.
READ MORE
How to Future-Proof Your HVAC and Hydronics Contracting Business
With rapid technological advancements and shifting market demands, HVAC contractors must adapt to stay competitive. Here’s how to ensure long-term business success.
READ MORE
Gas, Electric or Hybrid for HVAC and Hydronic Systems: What to Expect for the Next Five Years
The HVAC industry is at a crossroads, with gas, electric, and hybrid systems all competing for dominance. What can contractors and businesses expect in the next five years?
READ MORE
Are Cold Climate Heat Pumps Well Suited for Commercial Applications?
Cold climate heat pumps are gaining traction as an energy-efficient alternative to traditional heating systems. But are they viable for commercial buildings?
READ MORE
Custom Sheet Metal Fabrication – Lost Art or Essential HVAC Skill?
In the age of prefabrication and automation, is custom sheet metal fabrication still relevant? The answer is a resounding yes.
READ MORE
Why Are A2L Refrigerants Better for the Environment and the Future of the HVAC Industry?
As the HVAC industry undergoes a significant transition toward sustainability, A2L refrigerants are emerging as a key solution for reducing environmental impact.
READ MORE
Pros and Cons of Press Fittings for Hydronics and Refrigeration vs. Brazing
In the world of hydronics and refrigeration, connecting pipes and components efficiently and reliably is crucial. Two common methods for joining pipes are press fittings and brazing. Each technique has its own set of advantages..
READ MORE
Is Your HVAC Contracting Business Ready for the A2L Refrigerant Transition?
The HVAC industry is undergoing a significant shift, and one of the most important changes in recent years is the transition to A2L refrigerants. These low global warming potential (GWP) refrigerants are becoming the new standard…
READ MORE
How the Addition of Hydronics to Your Existing HVAC Business Can Benefit Your Customers
As an HVAC contractor, expanding your service offerings to include hydronics can significantly enhance the value you provide to your customers. Hydronics, the use of water or other liquids to transfer heat, is an increasingly…
READ MORE