Safety Overflow Switch - 24volts

ITEM NUMBER : SOS-1 | Universal Parts

Designed for use on 3/4in, PVC condensate drain line. Snaps easily over existing drain line tubing and can be glued in place using PVC cement.

Electronically senses water near the inside wall of the PVC drain tubing
Locates the SOS with its body away from the normal flow, it can be used to detect a possible overflow condition when the PVC drain line becomes full with water
The condensate drain line is normally mostly empty with a small amount of water flowing in the lower parts of the horizontal run
Since the sensor component of the SOS only covers part of the tubing, a low volume of flowing water does not activate the switch
The pipe must be full or near full to activate the switch. Mount SOS horizontally, vertically, or at any angle
Simple to install: DiversiTech Flood Prevention Switch installs in just minutes in the primary or auxiliary drain line
Flexible installation: The Flood Prevention Switch may be installed horizontally or vertically depending on the location and positioning of the drain line
Reliable operation: These switches use proven magnetic reed switch technology to ensure proper operation and prevent costly problems
Prevents costly damage: DiversiTech Flood Prevention Switches shut off the system when water backs up in the drain line due to a clogged line. This prevents costly damage to equipment, floors, walls and ceilings.
UL listed: These switches confirm to UL 508 standards and also comply with applicable NEC codes
Several Models Available: DiversiTech offers three models of Flood Prevention Switches. Switches are available in a T, elbow, and clip on pan version to match any installation requirement